Using The Turkey Baster Method For Old Fluid Removal Youtube Welcome to my channel where i show you how to make your cars last 25 years. using the turkey baster method of removing old fluid from your brake, power steer. Mar 2, 2004. #4. i always start by extracting the fluid from the master cylinder with a turkey baster, then filling it with fresh brake fluid before starting the system bleeding. why run all that old fluid thru the lines plus it requires fewer pumps to get clean fluid at the bleed ports. i also believe brake fluid should be changed every 4 or 5.
Using The Turkey Baster Method Part 2 Youtube Welcome to my channel where i show you how to make your cars last 25 years. in this video i expand on the turkey baster method for old fluid removal by showi. #brakebleeding#brakefluid#brakejobthis video shows you how to use the turkey baster method to replace brake fluid in the master cylinder. a 2006 scion tc was. Step 3. fill reservoir with fresh fluid to the “full” marker and leave the cap loose on top of the fill hole. step 4. lubricate the threads of the bleeder valve on the brake caliper. fill the soda bottle with a few inches of fresh brake fluid. attach cap and feed the hose through the hole in the cap into the bottle so that the end of the. Use the turkey baster to remove as much fluid as possible from the master cylinder reservoir. brake fluid can damage the baster’s rubber bulb, so don’t suck the fluid all the way into it. don’t fully empty the reservoir or you will introduce air into the brake hydraulic system. squirt the old fluid into the recycling bottle.
What Is The Turkey Baster Method Step 3. fill reservoir with fresh fluid to the “full” marker and leave the cap loose on top of the fill hole. step 4. lubricate the threads of the bleeder valve on the brake caliper. fill the soda bottle with a few inches of fresh brake fluid. attach cap and feed the hose through the hole in the cap into the bottle so that the end of the. Use the turkey baster to remove as much fluid as possible from the master cylinder reservoir. brake fluid can damage the baster’s rubber bulb, so don’t suck the fluid all the way into it. don’t fully empty the reservoir or you will introduce air into the brake hydraulic system. squirt the old fluid into the recycling bottle. I would pull as much of the old fluid as you can out the master cylinder with the turkey tool, put some fresh one in and the start bleeding the brakes one by one, and keep topping up the master cylinder as you go along. bleed each caliper until the fluid that comes out the bleeder at each wheel is nice and clean, then move on to the next. Using a turkey baster to remove the old fluid from the m c resevoir saves having to bleed all of that old fluid through the brake lines. suck the old fluid out until you get to the hole where the fluid goes into the m c and then refill with fresh fluid and then bleed the brakes. it's not a "temporary" way as the old fluid remains in the lines.
Comments are closed.